Go to homepage
€0.00*

T25/Vanagon Cluster PCB until Model Year '84

Skip image gallery

€169.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 2-12 Tage

Product number: T3-CL-PCB-84

Product information "T25/Vanagon Cluster PCB until Model Year '84"

For all T3 up to model year 1984.  

Suitable for all diesel and gasoline engines.  Not suitable for models with yellow high beam LED! 
In the set are all parts that are needed.  
The perfect replacement for the defective T3 speedometer film.   
This is a kit with a prefabricated circuit board and all necessary components.  On the board all components are already assembled in SMD. Nothing more has to be soldered.  
The kit also comes with a prefabricated cable set.  The instructions can be found here on my site.  This kit can be used as an alternative for the VW spare part numbers 251 919 059 A/B/C/D/E/F/G/K.   
The kit was designed for easy installation. Nevertheless, the installation should be done by skilled personnel.   
 If something should be unclear, then please use the contact form for your questions.
Fahrzeug: T3 bis MJ'84

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Passend dazu:

Ablagefach Armaturenbrett
Ablagefach Armaturenbrett
Unser geliebter T3 ist leider dafür bekannt nicht gerade viele Ablagemöglichkeiten zu haben.Hier gibt es jetzt Abhilfe.Dieses Ablagefach kann ganz individuell am Armaturenbrett vom T3 mit Hilfe von starken Neodym-Magneten beliebig am Armaturenbrett befestigt werden.Ganz ohne bohren oder kleben und jederzeit ohne Spuren wieder zu entfernen oder zu versetzen.Beim Syncro passt die Ablage genau zwischen Sperrbestätigung und Handschuhfach.Breite: 160mmMaterial: ASA-XACHTUNG!Die Ablage ragt bis unten auf die Heizungsblende. Diese muss bis zum Anschlag eingeschoben werden. Ansonsten kann die Ablage nicht vernünftig am Armaturenbrett befestigt werden.

€45.00*
Digital Clock LCD Screen
Digital Clock LCD Screen
Repair kit for the digital clock display suitable for VW T3 various VW Golf 2 and other VW models. Often the LCD of the digital clock in the cockpit is partially or completely leaked. Remedy is then only a completely new clock or the replacement of the LCD. In the scope of supply are also new ladder rubbers included PLEASE NOTE: Replacing the LCD does not fix any faults in the wiring or electronics. The installation should not be done by laymen

€24.00*
Instrument carrier repair corners
Instrument carrier repair corners
Repair corners for the instrument holders. If on the tabs the instruments (speedometer, tachometer or analog clock) are broken off, they can be replaced with these corners. These corners are printed from ABS and can be fixed with a little super glue or 2K glue.

€3.00*
Instrument Cluster Repair Corners
Instrument Cluster Repair Corners
This repair corner was specially designed to repair the broken corners on the T25/Vanagon instrument cluster. In all the instrument cluster housings I have seen so far, the corners were torn or partially torn out. As soon as the thread is no longer present, it becomes very difficult to fix the speedometer or tachometer reasonably. Remedy is this corner. They are attached to the housing with a little super glue or with 2K glue. This gives the screws a hold again. These corners are printed from ABS.

From €12.00*
Details
Instrument Cluster Repair Corners
Instrument Cluster Repair Corners
This repair corner was specially designed to repair the broken corners on the T25/Vanagon instrument cluster. In all the instrument cluster housings I have seen so far, the corners were torn or partially torn out. As soon as the thread is no longer present, it becomes very difficult to fix the speedometer or tachometer reasonably. Remedy is this corner. They are attached to the housing with a little super glue or with 2K glue. This gives the screws a hold again. These corners are printed from ABS.

€6.00*
Mutternset Tank- und Temperaturanzeige
Mutternset Tank- und Temperaturanzeige
Set mit Muttern zur Befestigung der Tank- und TemperaturanzeigeSorgen für den idealen Kontakt für die Anzeigen. Inhalt:4 Muttern M4 aus Messing4 Federscheiben A4 (gewölbt aus verzinkten Federstahl)1 Mutter M2.3 aus Messing1 Federscheibe A2.3 (gewölbt aus verzinkten Federstahl)

€8.00*
OXS LED
OXS LED
Die rote LED für die OXS LED wird anstelle der Diesel LED eingesetzt.Da wo beim Diesel eine gelbe LED ist kann die OXS LED verwendet werden.

€1.00*
Schraubenset Tachogehäuse
Schraubenset Tachogehäuse
Schraubensortiment passend für das TachogehäuseInhalt:10 Schrauben 3,5 x 16Schrauben speziell für ThermoplasteLinsenkopf, Kreuzschlitz H-Phillips

€8.00*
Schraubenset Tachohalterung
Schraubenset Tachohalterung
Schraubenset für den Tacho zur Befestigung.Ideale Länge in Verbindung mit den Tachogehäuse HalterInhalt:4 Schrauben 4.2 x 19 (Linsen-Blechschrauben mit Phillips-Kreuzschlitz H)4 Unterlegscheiben 4,3 (schwarz verzinkt)

€6.00*
Terminal - Instrument Cluster
Terminal - Instrument Cluster
Crimp contact for instrument cluster connectorquality: - Reproduction  - adjustments may be necessary (remove degree, bend up)VW number: N0171912, N0171914, 000979102

From €1.45*
Details
This website uses cookies to ensure the best experience possible. More information...